Half-bridge (2) DMOS Brushed DC 40V Parallel Control And Power
Stage DC Motor Driver Chip TLE5205-2G
Characteristics
The continuous output current is up to 5A, and the peak current is
up to 6A
• Optimized for DC motor management applications
It operates when the power supply voltage is as high as 40V
• Extremely low RDSON; Typical value: 200 mΩ for each switch at
25°C
• Output full short-circuit protection
• Overheat protection with lag function
And diagnosis
• Short circuit and open load diagnosis
Carry the open leakage error mark
• Under-voltage lock
• Compatible with CMOS/TTL input with lag function
• No cross-current
• Internal free-rotation diode
• Wide temperature range; − 40 °C < Tj < 150 °C
• Green products (compliant with RoHS standards)
• AEC qualified
Description
PG-TO220-7-12
TLE 5205-2
PG-TO220-7-11
PG-DSO-20-37
PG-TO263-7-1
PG-TO220-7-12
TLE 5205-2 is an integrated power H-bridge with a DMOS output stage
for driving
Dc motor. This component is manufactured using Infineon's
multi-technology SPT® process
This enables bipolar and CMOS control circuits as well as DMOS
power devices to exist
On the same single-piece structure.
The operation modes include forward rotation (clockwise), reverse
rotation (counterclockwise), braking and high impedance
It can be invoked with just two control pins compatible with
TTL/CMOS. The extremely low RDS ON is combined with the power IC
package that uses low thermal resistance,
High heat capacity helps to minimize system power consumption. At
the power source
Cut-off capacitor
It is the only external circuit due to the integrated freewheeling
diode
Input circuit
The control input consists of TTL/ CMOS-compatible Schmidt
flip-flops with hysteresis.
The buffer amplifier is driven by this stage.
Output stage
The output stage is composed of DMOS H-bridges. Integrated circuit
protection output
Protect against short-circuit damage to ground and power supply
voltage. Positive and negative voltage
The peak is integrated when switching the inductive load
Freewheeling diode limitation.
Each output transistor has a monitoring circuit to detect whether
the transistor is
Be in an active state and prevent the corresponding source
transistor (sink transistor) in this case
Packaging and transportation instructions
- According to the standard export packaging.
Customers can choose from cartons, wooden cases and wooden pallets
according to their own requirements.
Q&A
1. How to obtain the price?
We usually quote within 24 hours after receiving your inquiry
(except weekends and holidays). If you are in urgent need of a
price, please send us an email or contact us in any other way so
that we can provide you with a quotation.
2. What is your delivery time?
This depends on the quantity of the order and the season in which
you place the order. Usually, we can ship the goods within 7 to 15
days (for small batches), and for large batches, it takes about 30
days.
3. What are your payment terms?
Factory price, 30% deposit, 70%T/T payment before shipment.
4. What is the mode of transportation?
It can be transported by sea, air or express delivery (EMS, UPS,
DHL, TNT, FEDEX, etc.). Please confirm with us before placing an
order.
5. How do you help our business establish a long-term and good
relationship?
We maintain good quality and competitive prices to ensure that our
customers benefit.
2. We respect every customer as our friend. We do business with
them sincerely and make friends with them, no matter where they
come from.
