DSP DSC 16Bit Fixed-Point Digital Signal Processor
TMS320VC5416PGE160
TMS320VC5416 FeaturesTMS320VC5416Fixed-Point Digital Signal
Processorwww.ti.com SPRS095P–MARCH 1999–REVISED OCTOBER 2008•
Advanced Multibus Architecture With Three ReadsSeparate 16-Bit Data
Memory Buses and One • Arithmetic Instructions With Parallel Store
andProgram Memory Bus Parallel Load• 40-Bit Arithmetic Logic Unit
(ALU) Including a• Conditional Store Instructions40-Bit Barrel
Shifter and Two Independent• Fast Return From Interrupt40-Bit
Accumulators• On-Chip Peripherals• 17- × 17-Bit Parallel Multiplier
Coupled to a– Software-Programmable Wait-State40-Bit Dedicated
Adder for Non-PipelinedGenerator and ProgrammableSingle-Cycle
Multiply/Accumulate (MAC)Bank-SwitchingOperation– On-Chip
Programmable Phase-Locked• Compare, Select, and Store Unit (CSSU)
for the Loop (PLL) Clock Generator With ExternalAdd/Compare
Selection of the Viterbi Operator Clock Source• Exponent Encoder to
Compute an Exponent – One 16-Bit TimerValue of a 40-Bit Accumulator
Value in a – Six-Channel Direct Memory Access (DMA)Single Cycle
Controller– Three Multichannel Buffered Serial Ports• Two Address
Generators With Eight Auxiliary(McBSPs)Registers and Two Auxiliary
RegisterArithmetic Units – 8/16-Bit Enhanced Parallel
Host-Port(ARAUs)Interface (HPI8/16)• Data Bus With a Bus Holder
Feature• Power Consumption Control With IDLE1,• Extended Addressing
Mode for 8M × 16-BitIDLE2, and IDLE3 Instructions WithMaximum
Addressable External ProgramPower-Down ModesSpace• CLKOUT Off
Control to Disable CLKOUT• 128K × 16-Bit On-Chip RAM Composed of:•
On-Chip Scan-Based Emulation Logic, IEEE– Eight Blocks of 8K ×
16-Bit On-ChipStd 1149.1 (JTAG) Boundary Scan Logic(1)Dual-Access
Program/Data RAM– Eight Blocks of 8K × 16-Bit On-Chip • 144-Pin
Ball Grid Array (BGA)(GGU Suffix)Single-Access Program RAM •
144-Pin Low-Profile Quad Flatpack• 16K × 16-Bit On-Chip ROM
Configured for (LQFP)(PGE Suffix)Program Memory • 6.25-ns
Single-Cycle Fixed-Point Instruction• Enhanced External Parallel
Interface (XIO2) Execution Time (160 MIPS)•
Single-Instruction-Repeat and Block-Repeat • 8.33-ns Single-Cycle
Fixed-Point InstructionOperations for Program Code Execution Time
(120 MIPS)• Block-Memory-Move Instructions for Better • 3.3-V I/O
Supply Voltage (160 and 120 MIPS)Program and Data Management •
1.6-V Core Supply Voltage (160 MIPS)• Instructions With a 32-Bit
Long Word Operand • 1.5-V Core Supply Voltage (120 MIPS)•
Instructions With Two- or Three-Operand (1) IEEE Standard
1149.1-1990 Standard-Test-Access Port andBoundary Scan Architecture
Packaging and transportation instructions
- According to the standard export packaging.
Customers can choose from cartons, wooden cases and wooden pallets
according to their own requirements.
Q&A
1. How to obtain the price?
We usually quote within 24 hours after receiving your inquiry
(except weekends and holidays). If you are in urgent need of a
price, please send us an email or contact us in any other way so
that we can provide you with a quotation.
2. What is your delivery time?
This depends on the quantity of the order and the season in which
you place the order. Usually, we can ship the goods within 7 to 15
days (for small batches), and for large batches, it takes about 30
days.
3. What are your payment terms?
Factory price, 30% deposit, 70%T/T payment before shipment.
4. What is the mode of transportation?
It can be transported by sea, air or express delivery (EMS, UPS,
DHL, TNT, FEDEX, etc.). Please confirm with us before placing an
order.
5. How do you help our business establish a long-term and good
relationship?
We maintain good quality and competitive prices to ensure that our
customers benefit.
2. We respect every customer as our friend. We do business with
them sincerely and make friends with them, no matter where they
come from.
